10EM 10EW 20EW 20EM 612EC 500WS 6kEC
3-In-1
Aerosol
3-In-1
Handspray
3-In-1 Voc Free
Aerosol
Voc Free
Lavender Aerosol
Kleanze+ Kleanze
VOC Free Aerosol
Kleanze
Industrial
Lullaby d'Bug Q'Bug Eden
 
10EM
 
 
Please click here for BIOVECTROL® 10EM MATERIAL SAFETY DATA SHEET
Please click here for BIOVECTROL® 10EM BROCHURE
 
 

BIOVECTROL® 10EM is a new concept, water-based, multifunctional, eco-environmentally friendly solution based on unique concoction of botanical extracts and Etofenprox®1 design to protect and enhance animal health.

 
Functions
 
BIOVECTROL® 10EM, has the following effective functions:
 
DISINFECTANT
INSECTICIDE
OVICIDAL/LARVICIDAL
INSECT REPELLENT
FUNGICIDE
DEODORISER
 
 
Basic Bacterial Activity In Animal Farms
 
TEST MICRO ORGANISMS Initial count of test micro organism per ml of test mixture Average count of surviving test micro organism per ml of test mixture at 45 & 60 minutes Percentage of test microorganism inactivated at 45 & 60 minutes
Salmonella Enteritidis phage
Type 4 (Poultry Isolate)
41 x 106 0 > 99.99%
Salmonella Typhimurium
(Poultry Isolate)
91 x 106 0 > 99.99%
Escherichia Coli
(Poultry Isolate)
95 x 106 0 > 99.99%
Escherichia Coil O157:H7
(Cattle Isolate)
47 x 106 0 > 99.99%
Pasteurella Multicoda
(ATCC 12948)
19 x 106 0 > 99.99%
Salmonella Choleraesuis
(ATCC 10708)
57 x 106 0 > 99.99%
Actinobacillus Pleurophbcillus
(Pig solate)
28 x 106 0 > 99.99%
Test conducted by Agri-Food & Veterinary Authority of Singapore (AVA), yields the above results. BIOVECTROL® 20EM was diluted at 1:80 and effectiveness against various bacteria were observed following a 45 and 60 minute exposure.
 
 
Basic Veridical Activity In Animal Farms
 
TEST VIRUS (%) Reduction after 45 minutes exposure (%) Reduction after 60 minutes exposure
Classical Swine Fever Virus ≥ 99.9% ≥ 99.9%
Aujeszky Disease Virus ≥99.999% ≥99.999%
Infectious Bronchitis Virus ≥99.999% ≥99.999%
Newcastle Disease Virus ≥99.999% ≥99.999%
Test conducted by Agri-Food & Veterinary Authority of Singapore (AVA), yields the above results. BIOVECTROL® 20EM was diluted at 1:80 and effectiveness against various bacteria were observed following a 45 and 60 minute exposure.
 
 
Insecticide
 
The active ingredient Etofenprox is environmentally friendly and is non-poisonous, as characterized by a very high Lethal Dose2 (LD50 > 42,800mg/kg) on lab rat (the value is 14 times safer than table salt).
 
 
Toxicology
 
SAFETY COMPARISION AMONG VARIOUS INSECTICIDES
   
 
Insecticide LD50 mg/kg
(Rat)
Odor Ch-Esterase Inhibition Irritation
ETOFENPROX® > 40,000
Malathion 1,375
Cyfluthrin 250
Temephos 1,266
Bendiocarb 40 ~ 156
Permethrin 430 ~ 470 Slight
Lamda-cyhalothrin 79
Pirimphos-methyl 2018
Deltamethrin 129
Cypermethrin 250 Slight
COMPARSIONS WITH COMPOUNDS FOR DAILY CONSUMPTION
Common Salt 3,000
Sugar 29,700
   
  The Etofenprox is effective against a broad spectrum of vectors and pests including mosquitoes, flies, cockroaches, triatomine bugs, fleas, etc.
By virtue of biodegradable and photodegradable properties of BIOVECTROL® 10EM, long term and repeated applications will not pose any environmental pollution.
   
   
ACUTE TOXICITY
   
 
Method of Administration Animals LD50 (mg/kg)
Oral Rats
Mice
Dogs
> 42,800
> 107,200
> 5,000
Dermal Rats
Mice
> 5,000
> 5,000
Subcutaneous Rats
Mice
> 32,160
> 53,600
Intraperitoneal Rats
Mice
> 42,880
> 53,600
   
SUBCUTANEOUS TOXICITY
  Sub acute dietary studies for 13 weeks on rats and mice did not show any adverse effects.
   
CHRONIC TOXICITY, TERATOGENICITY, MULTIGENERATION STUDY AND MUTAGENICITY
  Long term feeding toxicity studies on rats, mice and dogs did not show any adverse effects. Mutagenicity, teratogenicity and three-generation reproduction studies did not show noticeable abnormalities.
   
WHO HAZARD CLASSIFICATION
   
 
Insecticide WHO Hazard
Classification
ETOFENPROX® Table 5
Malathion Table 4
Cyfluthrin Table 3
Permethrin Table 3
Lamda-cyhalothrin Table 3
Pirimphos-methyl Table 4
Deltamethrin Table 3
Cypermethrin Table 3
   
IRRITATION AND INHALATION
  No skin and eye irritation on rabbits.
Inhalation toxicity (Rat) LD50 > 5,900 mg/m3
   
SAFE FOR MAMMALS AND ANIMALS
  It provides a safe and effective method of protection as it has no harmful influence to human, avian and non-target organisms.
   
PLESANT ODOR, NON-STAINING AND NON-IRRITANT
  Test has shown that BIOVECTROL® 10EM being water-based can be sprayed on animal directly without causing any discomfort and duress.
   
IMPROVEMENT OF LIVING CONDITIONS
  The reduction in larva and adult vector population (indoor and outdoor) will consequently decrease man-vector contact, thus promoting a healthier and more hygienic living environment.
   
FUNDAMENTAL ACTIVITY AGAINST HYGENIC PESTS
   
 
Vectors / Pests Stage Method LD50 or LC50
Culex Pipiens Larva Immersion 0.0054 ppm
Culex Quinquefasciatus Adult WHO test kit 0.0036 %
Anopheles Albimanus Adult WHO test kit 0.009 %
Anopheles Gambiae Larva Immersion 0.009 %
Anopheles Quadrimaculatus Larva Immersion 0.00085 ppm
Anopheles Stephensi Larva Immersion 0.0073 ppm
Aedes Taeniorhynchus Adult Aerosol 0.0013 ppm
Musca Domestica Adult Topical 0.064 μg / -
Stomoxys Calcitrans Adult Topical 0.0093 μg / -
Blattella Germanica Adult Topical 0.209 μg / -
   
 
Recommended Dilution Ratio
 
Product Usage Recommended Effective
Dilution Ratio
Remarks
BIOVECTROL® 10EM Disinfectant
Against AFS
1:160
1:160
For greater protection, can
reduce to 1:100
For general human
disinfection usage
1:200
Odour control 1:160
 
Insecticide only 1:200  
 
 
Recommended Preparation Procedure For Usage
 
1. Shake the BIOVECTROL® 10EM bottle vigorously to ensure a complete mix of the solution due to extended storage of the product.
   
2. Based on the desired application, pour out the right amount of BIOVECTROL® 10EM product with a measuring cup.
   
3. Use an empty bottle and add up to 200 - 300 ml of water and pour in the BIOVECTROL® 10EM, close the cap and shake the mixture vigorously for at least 10 seconds to ensure a good mix of the pre-mixed solution.
   
4.

Prepare the corresponding amount of water in a water container based on the desired application, pour the pre-mixed BIOVECTROL® 10EM (Step 3) into the container and stir thoroughly, and the diluted solution is now ready for application

   
5. Use hand-operated, electrical and/or oil-powered water fogging/spraying equipment to apply the BIOVECTROL® 10EM diluted solution into the air to allow the water mist to float in the air and descent by gravity onto the surface of
building. The solution can also be applied by spraying directly onto the wall and floor surfaces, direct the jet closer to the cracks/opening to ensure a deeper penetration and cleaning effects. Make sure we can see visibly that the floor surface is adequately wet, however be mindful to avoid wastage.
   
6. It is safe to apply the disinfectant BIOVECTROL® 10EM solution on the animals with the animals in the building.
   
7. Reminder: Do not keep diluted solution for more than a week. It is always best to finish the application of the BIOVECTROL® 10EM diluted solution on the same day of preparation. Keep solution away from direct sunlight and heat; do not keep solution in the car boot during summer.
 
 
Storage & Handling Precautions
 
• Keep container closed when not in use.
• Store away from foodstuffs and feeds.
• Avoid direct sunlight and high temperature storage.
• General ventilation and industrial protective clothing is sufficient.
 
 
Packing
 

Packed in HPDE bottle, the volume of each bottle is ONE litre. One Carton packaging has 12 bottles and One Pellet packaging has 50 cartons. The dimension of each carton is: 385 x 295 x 280 mm.

 
 
Suggested Fogging/Spraying Systems
 
 
 
1 ETOFENPROX®, is a unique “CHO – compound” composed of Carbon, Hydrogen and Oxygen only. ETOFENPROX® has been highly evaluated through the World Health Organization Pesticide Evaluation Scheme (WHOPES) and successfully approved by the Division of Tropical Diseases, WHO in 1997 with code number WHOPES/97.24.1.
 
2 In toxicology, the median lethal dose, LD50 (abbreviation for "lethal dose, 50%”) value for a substance is the dose required to kill half the members of a tested population after a specified test duration. LD50 figures are frequently used as a general indicator of a substance's acute toxicity. A lower LD50 is indicative of increased toxicity